The FRM-173 pull-out rack mount LCD monitor works with the resolution of 1920×1080, housed in a 19" rack that is 1U high. It integrates a LCD panel and a foldable frame to cater applications in limited space, applicable for ENG, outside broadcast van, etc.
1.This pull-out rack mount LCD monitor is suitable for 2 channels 3G-SDI input with 1 channel composite signal input, as well as active loop output, 1 channel Ypbpr signal input with 1 channel composite signal input, 1 channel HDMI input in compliance with DVI-D, 2 channels analog stereo input, etc.
2. It is capable of displaying 2 channels 3G-SDI signals through double screen under PBP and PIP modes.
3. Adjustable color temperature is available in the scope of D93, D65, D56, D32 and D50.
4. This device is able to display the waveform and vector, 16 channels audio meters, tri-color tallylight, time code, H/V delay, native mode, blue only or monocolor viewing modes, etc.
5. It is also mounted with an internal speaker.
|Panel||17.3" TFT LCD|
|Viewing Angle||160° (H) ×140° (V)|
|Contrast Ratio||600: 1|
|Conditions||Operation Temperature||0ºC-40ºC (32°F-104°F)|
|Storage Temperature||-20ºC-60ºC (-4°F-140°F)|
Note: Specifications are subject to change without notice.
Output: BNC×1 (Active loop through out)
Output: BNC×2 (Active loop through out, auto terminal)
Output: BNC×3 (Active loop through out, auto terminal)
|HDMI||Input: HDMI Type-A×1|
|Audio||AUDIO IN1||Analog Audio input RCA×2|
|AUDIO IN2||Analog Audio input RCA×2|